Products

PSM 1000 Wireless In-Ear Monitoring Dual Transmitter And Receiver Kit

1000-kit.jpg
1000-kit.jpg

PSM 1000 Wireless In-Ear Monitoring Dual Transmitter And Receiver Kit

5,105.00

The Shure PSM 1000 Personal Monitor Dual System is a professional wireless IEM monitoring system intended for touring, live venue installations, houses-of-worship, broadcast applications and anywhere high-grade wireless monitoring is necessary. The PSM 1000 features the P10T full-rack dual wireless transmitter and a pair of P10R diversity bodypack receivers.

Frequency:
Quantity:
Add To Cart

2 x Shure P10R Wireless Bodypack Receiver for PSM1000 (G10: 470-542MHz)

Modulation    
FM, MPX Stereo

Operating Range    
300' (90 m)

Frequency Response
38Hz - 15kHz

Signal to Noise Ratio    
90dB

RF Sensitivity    
2.2µV

Filter    
-3dB @ 30.5MHz, From Center Frequency of Each Band

Gain Control    
31dB

Image Rejection    
> 90dB

Adjacent Channel Crosstalk    
> 70dB

Blocking    
> 80dB

Squelch    
22dB SINAD

Intermodulation Distortion    
> 70dB

Load Impedance    
9.5 Ohms

Output Power    
100mW per Output

Gain Boost    
+2dB, +4dB @ 10kHz Selectable

Limiter    
3-9, Selectable

Connectors    
1 x 3.5mm Headphone Jack
2 x Antenna Connectors

Battery Type/Life    
2 x AA, Approx 4-6 Hours
1 x SB900 Li-ion Rechargeable Pack, Approx 10 Hours

Dimensions (HxWxD)    
3.9 x 2.6 x 0.9" (99 x 66 x 23mm)

Weight    
6.56 oz (186g) (With Batteries)

Packaging Info

Box Dimensions (LxWxH)    
10.9 x 5.3 x 3.3"

Shure P10T Dual Wireless Transmitter

RF Output Power    
Selectable: 10, 50, 100 mW (+20 dBm)
varies by region

RF Output Impedance    
50 Ω (typical)

Impedance    
70.2k Ω (actual)

Nominal Input Level    
Switchable: +4 dBu, -10 dBV

Maximum Input Level    
+4 dBu: +29.2 dBu
-10 dBV: +12.2 dBu

Connector Type    
Input: Combination XLR and 6.35 mm (1/4") TRS
Output: 1/4" TRS (6.35mm)
Pin Assignments
XLR: 1=ground, 2=hot, 3=cold
1/4" TRS (6.35mm): Tip=hot, Ring=cold, Sleeve=ground
Polarity
XLR: Non-inverting (pin 2 positive with respect to pin 3)
1/4" (6.35mm) TRS: Tip positive with respect to ring

Electronically balanced

Phantom Power    
Phantom power protection: Up to 60 VDC

Power Requirements    
Input: 100―240V AC, 50/60 Hz, 0.5A max (5.5 max outlet loaded)
Output: 100―240V AC, 5A max, unswitched

Dimensions    
19 x 13.50 x 1.73" (483 x 343 x 44mm)

Weight    
1.87 lb (850 g)

Packaging Info

Box Dimensions
(LxWxH)    27.6 x 17.7 x 3.74"